The Mitre-Titre 7mm glued-wedge frame fastener is the industry standard in the Mitre-Titre joining system. Combining mechanical holding with thermally activated adhesive in a single fastener, it creates corner joins that resist both static loads and the dynamic forces of transport and installation.
Dual-Action Joining with Mitre-Titre 7mm
Every Mitre-Titre wedge provides two forms of holding: mechanical engagement from the V-nail geometry and chemical bonding from the pre-applied heat-activated adhesive. This dual action produces corner joints stronger than either mechanism alone.
Technical Data
Wedge type: Mitre-Titre glued wedge | Leg size: 7 mm | Quantity per box: approx. 6000 | Material: Steel + glue coating | Compatible machines: Mitre-Titre system joiners | Moulding range: 10–16 mm wide.
Machine Operation Notes
Ensure machine heating element (if equipped) reaches operating temperature before production run to fully activate the adhesive coating on each wedge.
Inventory Recommendation
Stock 7mm as your primary Mitre-Titre size and supplement with 5mm and 10mm for edge cases.
View our full Mitre-Titre wedge range. Framing resources: PPFA.com.
