Gold-finish version of the horizontal Z-profile concealed hanger – preferred for gilded, walnut, or brass-accented frames where even hidden hardware should match the overall aesthetic.
Gold-finish version of the horizontal Z-profile concealed hanger – preferred for gilded, walnut, or brass-accented frames where even hidden hardware should match the overall aesthetic.
| Specification | Value |
|---|---|
| thickness | 0.7 |
| weight | ~5 (pair est.) |
| over all length | 48 |
| over all width | 15 |
| bow/arch height | 5 |
| key hole slot length | 11 |
| key hole slot width | 7 |
| screw hole diameter | 4 |
| no.of screw holes | 2 |
| max load capacity | 10 |
| color | Gold |
The gold plating adds a minor surface layer that may affect the interlocking fit tolerance slightly; the conservative 10 kg rating accounts for this. For loads up to 15 kg, use silver version O01.
Yes – the profiles are dimensionally identical; mixing finishes is functionally fine though aesthetically mismatched.
Light surface wear at the contact point is possible after repeated removal; for permanent installations this is not a concern.
Gold-finish version of the horizontal Z-profile concealed hanger – preferred for gilded, walnut, or brass-accented frames where even hidden hardware should match the overall aesthetic.