The narrow black sawtooth frame hanger is specifically engineered for frames with very thin borders. It allows for secure hanging without protruding above the frame.
The narrow black sawtooth frame hanger is specifically engineered for frames with very thin borders. It allows for secure hanging without protruding above the frame.
| Specification | Value |
|---|---|
| thickness | 0.5 |
| weight | 1.3 |
| over all length | 20 |
| over all width height | 24 |
| bow/arch height | N/A (stepped) |
| slot tooth length | 14 |
| slot tooth height | 6 |
| screw hole diameter | 5 |
| screw hole spacing | ~12 |
| material finish | Cold-rolled steel |
| color | Black |
The step reduces the gap between the frame back and wall by approximately 10 mm compared to standard L-bracket hangers.
Use a 1.5–2 mm round-wire picture nail; insert at a 45° angle into the wall for maximum holding power in the sawtooth slot.
Yes – run wire between two N09 plates placed symmetrically on the frame back for a leveling-wire setup.
The narrow black sawtooth frame hanger is specifically engineered for frames with very thin borders. It allows for secure hanging without protruding above the frame.
