Universal Corner Nailer Die Block 25x24mm – 19mm tall hardened steel die

NN09-Universal Corner Nailer Die Block 25x24mm

SKU: NN09

Key Specs

Body Width: Body Depth
Body Depth: 24 mm
Body Height: 19 mm
Groove Opening: 9.5 mm
Nail Slot Depth: ~3 mm
Locking Ports: Dual set-screw ports

MOQ: 100•Lead time: 7-10days•Custom packaging: Available

The Universal Corner Nailer Die Block 25x24mm (钉模) is a taller hardened steel die designed for corner nailing machines with deeper die seats. Its 9.5mm groove opening and dual-locking ports make it broadly compatible with multiple machine brands.

Specification	Value
Body Width	25 mm
Body Depth	24 mm
Body Height	19 mm
Groove Opening	9.5 mm
Nail Slot Depth	~3 mm

How tall is this die block compared to other models?

At 19mm, this die block is taller than most standard dies, making it suited for machines with deeper die seat pockets that require additional die height for proper alignment.

What is the groove opening width?

The V-groove opening is 9.5mm wide, slightly wider than the 9mm standard, accommodating V-nail variants with slightly wider leg spans.

Does this die include locking hardware?

The die body includes dual locking ports for set screws. Standard M4 or M5 set screws (verify your machine specification) are used to secure the die in its seat.

Universal Corner Nailer Die Block 25x24mm – Tall-Body Production Die

The Universal Corner Nailer Die Block 25x24mm is a tall-body hardened steel nailing die engineered for corner nailing machines that feature deeper die seat pockets. At 19mm tall, it provides additional engagement depth for positive die retention and accurate nail delivery.

Specifications

Width: 25mm | Depth: 24mm | Height: 19mm. V-groove opening: 9.5mm. Nail slot depth: approximately 3mm. Two locking ports are positioned for dual set-screw retention, preventing die movement during high-intensity production cycles.

Universal Compatibility

The 25x24mm footprint of the Universal Corner Nailer Die Block 25x24mm is one of the most widely used die seat dimensions across major corner nailer brands, making it a convenient universal replacement part for workshops operating machines from multiple manufacturers.

Groove Design

The 9.5mm groove opening accepts a slightly wider range of V-nail profiles than strictly sized dies, acting as a cross-compatible option when specific die numbers are not available.

Installation

Lower the die into the machine’s die seat with the groove facing the ejector pin. Tighten both set screws alternately to ensure even clamping force and prevent die tilt. Confirm nail alignment by running a test cycle on scrap material.

Browse the full XKY die range: Tabletop Die #7 | Standard Die #10.