Silver Five-Hole Thick L-Bracket Corner Brace 72mm – Maximum Strength for Heavy Frames
The Silver Five-Hole Thick L-Bracket Corner Brace 72mm (SKU: L35) is the strongest standard flat L-bracket in the XKY Framing range. Machined from 1.2mm thick steel with a zinc-plated silver finish, it features a 72mm long arm, 57mm short arm (both 16mm wide), and 5 screw holes of 4mm diameter for maximum corner anchoring in picture frames, wooden furniture, and structural woodwork applications.
Why the Silver Five-Hole Thick L-Bracket Corner Brace 72mm Outperforms Standard Brackets
At 1.2mm plate thickness, the Silver Five-Hole Thick L-Bracket Corner Brace 72mm is triple the thickness of thinner 0.4mm brackets in the range. This rigidity prevents the bracket from bending under load, maintaining perfect 90-degree joint alignment even on heavy frames subject to handling and transport. The 5-hole design adds an extra mounting point vs standard 4-hole designs for additional pull-out resistance.
Technical Specifications
Long arm: 72mm | Short arm: 57mm | Arm width: 16mm | Plate thickness: 1.2mm | Screw hole diameter: 4mm | Number of holes: 5 (2 vertical + 3 horizontal) | Finish: Zinc-plated steel (silver) | Screws: Not included.
Application and Installation Guide
The Silver Five-Hole Thick L-Bracket Corner Brace 72mm is applied to the interior corner of picture frame joints, cabinet corners, and box frame assemblies. Position the bracket flush in the corner, align all holes over the wood, and secure with No.8 or No.10 wood screws at minimum 12mm depth. For frame corners install one bracket per corner for complete joint reinforcement.
For the version that includes screws, see our L36 version with screws included. Browse heavy-duty L-brackets at Amazon’s heavy-duty L-bracket selection.
Frequently Asked Questions
Q: Why does L35 have 5 holes instead of 4?
A: The extra hole distributes corner stress across more anchor points for superior pull-apart resistance.
Q: What makes L35 the strongest standard bracket?
A: 1.2mm plate — thickest in the range — plus 5 holes and 72mm arms handle heavy frames and dynamic loads.
Q: What screw size fits L35?
A: 4mm holes accept No.8 or No.10 wood screws with at least 12mm penetration.
